Motor is the most important parts during the machine running, when the most important parts of the motor is burned, we need to re-install the new motor, while the cost is relatively high. Therefore, the temperature also has an impact on the sifter.
(1) Exposure to the sun for long hours, not only make the machine become old, aging, also lead sifter machine temperature too high to work, affecting the efficiency and quality of the screening. If the situation is so serious may also lead to the sifter some parts damaged such as vibrating motor.
(2) Vibrating Screen works in indoors or mine kiln, we should pay attention to the indoor temperature regulation and ventilation, breathability. Ambient temperature is generally not more than 40 degrees to keep a good working environment for vibrating screen.
(3) We can rely on the nearby air to cool the motor, and use a few expansion thermometers measurements placed into the way that the cooling air entered to measure the cooling air temperature. Head of thermometer placed 1 ~ 2m away from the motor, and the thermometer not affected by external radiant heat and air flow. Thermometers should use indexing to 0.2 ℃ or 0.5 ℃, the range is 0 ~ 50 ℃.
Sifter rely on vibration motor to work, motor is the core component of the sifter, if vibrating motor temperature is too high, how to solve it?
Sifter core components is vibration motor, vibration motor insulating materials affected greatly by temperature, high temperature will make the insulation aging and shorten the life of the motor, even cause damage to the insulation.
We can choose appropriate vibration motor to prevent sifter overheating and do not use the too small power motor, which not only affect the screening efficiency make the quality is not up to the screening, but also causes the motor overload running, result in the temperature too high then influence the life of the vibrating screen, so we should consider the production and tolerance of the device when we using sifter.
没有评论:
发表评论